Rit Dye Halloween Project! - Blood Splatter Table Cloth

October 20, 2023

Rit Dye Halloween Project! - Blood Splatter Table Cloth

Rit Dye - Blood Splattered Table Cloth

What You Will Need:


  1. Prewash table cover in the washing machine before dyeing and dry. This removes any manufacturer’s finishes that may interfere with dye absorption.
  2. Wearing gloves, mix 2 tablespoons of well-shaken Scarlet All-Purpose liquid dye with two cups of tap water. Add food thickener following directions on package and shake well. Allow dye to sit and thicken for 30 minutes.
  3. Pour half of the thickened dye solution into squeeze bottle and leave remaining in the jar.
  4. Cover work area with plastic table cover and have paper towels handy to protect against any possible spills
  5. Lay tablecloth flat on covered work surface.
  6. To apply dyes, hold the squeeze bottle upside down and shake to create splatter effect.
  7. Use remaining dye solution and pipette to fill in empty spaces on the table cloth.
  8. To set the dye, spray ColorStay Dye Fixative over the entire tablecloth.
  9. Allow dyes to set and dry for up to 1 hour.
  10. Rinse in cold water until rinse water runs clear. This is important to prevent unabsorbed dye from bleeding into the white areas.
  11. Wash in cold water with a mild detergent and dry.


Contact us at (416) 461-1033, email us at info@wotever-inc.com, or follow us on social media! And don’t forget to visit our store in-person or shop online to see our massive selection of proudly Canadian products.